Why bridge them on the router? If the two interfaces are connected to different switches, why not either:
a) Run a cable between the two and trunk the VLAN accross if its the same VLAN ID; or b) Run a cable between the two, with each end in its respective VLAN But a little more detail about what you want to achieve might help us better advise of a solution. > I am full of questions tonight - that's what happens when you are working on > a dozen things at once. > > I am looking to bridge two layer 2 dot1q interfaces coming in on 2 different > Ethernet interfaces on a 7200(g1/300/400) > > Is what I am looking at a BVI? > > Skeeve > > -- > Skeeve Stevens, RHCE > [EMAIL PROTECTED] / www.skeeve.org > Cell +61 (0)414 753 383 / skype://skeeve > > eintellego - [EMAIL PROTECTED] - www.eintellego.net > -- > I'm a groove licked love child king of the verse > Si vis pacem, para bellum > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
