Can you move the config to a different interface, just to rule out a flaky port?
Chuck -----Original Message----- From: Ras [mailto:[EMAIL PROTECTED] Sent: Monday, June 25, 2007 9:48 AM To: Church, Charles Cc: c-nsp Subject: Re: [c-nsp] FE switchport output drops On 25/06/07, Church, Charles <[EMAIL PROTECTED]> wrote: > Is the port configured with anything out of the ordinary, broadcast > storm suppression, policing, etc? Anything in the logs showing up > involving layer 2 or 3 stuff - unresolved MAC addresses, ARP? > Backplane issue maybe on that card or CPU on the sup? Did it just > start doing this? If so, what changed? The entire config is: interface FastEthernet2/11 switchport trunk encapsulation dot1q switchport trunk allowed vlan 302,310,406,409,503,604,900 switchport mode trunk load-interval 30 speed 100 duplex full There are no log entries showing anything out of the ordinary on the switch or this port specifically. We have only just noticed this, I suspect it has been going on for some time and actually explains some strange packet drop issues we've been investigating for a little while. Thanks, Ras _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
