Hello,
We have a 6509 running 12.2(18)SXF4. In this chassis we have a FWSM
running 3.1(5) software.
Recently I configured logging to write to flash and up'ed the default
1MB whcih logging can use to 2MB of 56MB flash:
logging flash-bufferwrap
logging flash-maximum-allocation 2000
On configuring, the logs were written to disk:/syslog, a directory which
the FWSM created itself.
The directory filled up it's 2MB and started to wrap, all seemed well.
After a week or so of logging, I can no longer 'dir' on the disk:/
device:
6509-FWSM/6/act# dir
Directory of disk:/
No files in directory
59748352 bytes total (0 bytes free)
I have switched off all logging to flash and tried to deleted the syslog
directory:
6509-FWSM/6/act# rmdir disk:/syslog
Remove directory filename [syslog]?
Delete disk:/syslog? [confirm]
%Error Removing dir disk:/syslog (File not found)
Has anyone had this problem before?
Thanks,
Mark
Mark Tohill
UTV Internet
T:+44 (0)28 90 262196
M:+44 (0)7786 278716
E:[EMAIL PROTECTED] <blocked::mailto:[EMAIL PROTECTED]>
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
