He's asking about 802.1x for authentication. Not layer 2 trunking protocols.
Jason Plank, CCIE# 16560 Senior Network Engineer Conde Nast Publications 1201 North Market St. Wilmington, DE 19808 Email: [EMAIL PROTECTED] Office: 302-830-4910 Cell: 302-290-0387 -----Original Message----- From: Eric Kagan [mailto:[EMAIL PROTECTED] Sent: Thursday, June 28, 2007 07:24 AM Eastern Standard Time To: Affan Basalamah; [email protected] Subject: Re: [c-nsp] 802.1X on WS-C3524-XL-EN > > Hi all, > > I want to know is there any way to have my old WS-C3524-XL-EN > to allow 802.1X ? > If there are no way to enable this switch to allow dot1x, maybe I have > to look for another switch. > It supports both ISL and dot1q: interface GigabitEthernet0/1 description Trunk to XXX switchport trunk encapsulation dot1q switchport mode trunk ! Config t (confi)#int g0/1 (confi)#switchport trunk encapsulation ? dot1q Interface uses only 802.1q trunking encapsulation when trunking isl Interface uses only ISL trunking encapsulation when trunking _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
