Jon Lewis wrote: > I just tried setting up vrrp on the 6500s for one of these customer vlans > and found that neither 6500 would see the other's vrrp multicast packets, > and so each thought it was the only router and became the active router. > Is this a known issue when connecting switches to ports configured with > "switchport mode dot1q-tunnel"?
How are these actually connected to your network and 6500's? The ME3400's have UNI ports which can only pass traffic to an NNI ports and not to any other ports. (unless you setup some community VLAN's etc) -- Robert Blayzor INOC [EMAIL PROTECTED] http://www.inoc.net/~rblayzor/ YOUR PC's broken and I'VE got a problem? -- The BOFH Slogan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
