Hello all. We are configuring our routers for a point to point T1 circuit. We are using a similar config as we have had in the past with T1's. The problem we seem to be having is the connection goes up and down continuously. In fact, it will be up for 20 seconds, down for 10 seconds, and then repeats. It seems like some kind of timing issue, and after verifying no clocking from the Telco, we configured clocking on one router. That did not fix it. I believe our lead tech opened a TAC case for assistance, just wanted to get your thoughts too, before we schedule downtime to change out and try a different controller card.
Thanks. John Kienzle Senior ITS Analyst Anadarko Petroleum ----------------------------------------- Anadarko Confidentiality Notice: This electronic transmission and any attached documents or other writings are intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. If you have received this communication in error, please immediately notify sender by return e-mail and destroy the communication. Any disclosure, copying, distribution or the taking of any action concerning the contents of this communication or any attachments by anyone other than the named recipient is strictly prohibited. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
