On Wed, July 4, 2007 10:24 am, Code Monkey wrote: > Back in 2003 I failed miserably at configuring two 7206 VXR so that > their FE interfaces could be connected to a VLAN switch, running MPLS > in one VLAN and non-MPLS in other VLANs.
I've done this in a previous life, using the on-board ports on the I/O controller, one VLAN for tag-switching and one for vanilla IP. (For different reasons, relating to IPSec hairpinning mis-features, but the same set-up). Unfortunately I don't have access to the config any more to check, but I don't recall anything different to what you've posted. What IOS? I've had this running on 12.0S (sorry, again, can't access to check exact release), and with suitably enlarged 'tag-switching mtu' (will depend on how many labels you need space for). Regards, Tim. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
