Hello, There is a bug in cisco IOS 12.2(33) SRA1-3 (CSCsh69601). Workaround: Upgrade to SRA4.
On 6/21/07, talex < [EMAIL PROTECTED]> wrote: > > Hello, > > After upgradeing the IOS version to 12.2(33)SRA3 on C7613 Sup720, i've > noticed > some errors in the result returned by the snmp OID > ifHCOutOctets(.1.3.6.1.2.1.31.1.1.1.10.X) > when the outbound traffic on the interface is getting above 1,4-1,5 Gbps. > The counter > ifHCOutOctets is incrementing very slow compared with the interface rate > and it seems > this is present only for SVI and POS interfaces. If the interface rate is > below 1.4-1.5Gbps than > all is working just fine. > > r1#sh snmp mib ifmib ifindex pos 5/1 > Interface = POS5/1, Ifindex = 158 > > r1#sh int pos 5/1 | i rate > Queueing strategy: fifo > 30 second input rate 1069306000 bits/sec, 241519 packets/sec > 30 second output rate 1603264000 bits/sec, 288090 packets/sec > > Counters at the moment t: > IF-MIB::ifHCInOctets.158 = Counter64: 526401519111626 > IF-MIB::ifHCOutOctets.158 = Counter64: 313770252452833 > > Counters at the moment t+300s: > IF-MIB::ifHCInOctets.158 = Counter64: 526439672838946 > IF-MIB::ifHCOutOctets.158 = Counter64: 313777262293509 > > > From my calculation i get 1.02Gbps inbound and 186,93Mbps outbound witch > is far away from > the reality . Is there anyone else who encounter this problem so > far? I was looking on the > cisco bug toolkit but nothing regarding my problem. > > > Thanks. > > Alexandru Tudori > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
