Dear Gert, As the comtech CDM 600 has the data ineterface as EIA-422/530, V.35, Sync EIA-232, LVDS Iam using LVDS to HSSI converter. Any clue that how can I test HSSI cable?
Thanks, Kris. Quoting Gert Doering <[EMAIL PROTECTED]>: > Hi, > > On Fri, Jul 06, 2007 at 04:47:55PM +0300, [EMAIL PROTECTED] wrote: > > surpricingly the interface stats also looks fine. > > > > Hssi2/0 is up, line protocol is up > [..] > > 696594 input errors, 578459 CRC, 0 frame, 90706 overrun, 720 ignored, > > > 27429 > > abort > > Welll... I wouldn't call this "fine". Something in your hardware setup > is not right - either the HSSI cabling (never heard of using a LVD > converter here...) or the actual CSU/DSU box configuration. > > The interface shouldn't show CRC errors. Ever. > > gert > -- > USENET is *not* the non-clickable part of WWW! > > //www.muc.de/~gert/ > Gert Doering - Munich, Germany > [EMAIL PROTECTED] > fax: +49-89-35655025 > [EMAIL PROTECTED] > ---------------------------------------------------------------------- This mail sent through Toaster-Horde (http://qmailtoaster.clikka.com/) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
