Hello, I've some questions on that topic, too :)
On Tue, 17 Jul 2007 10:55:41 +0200, Ivan Gasparik <[EMAIL PROTECTED]> wrote: > Hello, > > The right place to activate policy-map in case of DSL WAN connection > is PVC inside interface ATM0: > > interface ATM0 > pvc x/y > cbr <speed> > service-policy output voice What exactly does the "cbr"-adjustment do under the pvc? Does it have an real effect on data flow or is it just an administrative/management configuration? We're having the problem, that we have a load auf 100% on our ADSL-lines on the upstream, because we're uploading massive background traffic. That leads to horrible high latency times. So we want to achieve, that we're only using i.e. 80% of the upload bandwidth. Sadly we can't use "bandwidth average" in the service policy, because the 836 (in our case), but I think the 876, too, can't shape on ATM. (afaik) Is that the case? Our has cbr an effect on bandwidth limiting, too? Can I also combine WRED with this adjustment? My tries with WRED were not successfull, because the OutQ was always "0". Thanks, regards, Dennis [...] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
