On Tue, Jul 17, 2007 at 05:34:39PM +0200, Ahmad Cheikh-Moussa wrote: > Hi Guys, > > can someone tell me, when queuing is done ? > Comes queuing before or after encryption ?
Ater. > > Another question is, I configured a simple priority-group > and assigned it to the vlan interface. This worked without > any problem. Is this a good idea ? No. That's the old legacy PQ implemenation. Don't do it. Use MQC with a policy map and a priority class. rodney > > priority-list 1 protocol ip high list 110 > > int vlan 1 > priority-group 1 > > > Regards, > Ahmad > > > > > -- > Ahmad Cheikh-Moussa > NetUSE AG > Dr.-Hell-Stra?e, 24107 Kiel, Germany > Telefon: +49 431 2390 400 -- Telefax: +49 431 2390 499 > Service: [EMAIL PROTECTED] -- http://NetUSE.DE/ > > Vorstand: Andreas Seeger (Vorsitz), Dr. Roland Kaltefleiter, Dr. Joerg > Posewang > Aufsichtsrat: Detlev Huebner (Vorsitz) > Sitz der AG: Kiel, HRB 5358 USt.ID: DE156073942 > > Diese E-Mail enthaelt vertrauliche oder rechtlich geschuetzte Informationen. > Das unbefugte Kopieren dieser E-Mail oder die unbefugte Weitergabe der > enthaltenen Informationen ist nicht gestattet. > > The information contained in this message is confidential or protected by > law. Any unauthorised copying of this message or unauthorised distribution > of the information contained herein is prohibited. > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
