Robert Blayzor wrote:
> Joe Maimon wrote: > >>Frame-Relay to Ethernet interworking is available in 12.411T IIRC. > > > > What about HDLC or PPP? This will not be a frame T1. > http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_feature_guide09186a00801b2407.html If you can use ppp or hdlc, surely you can do frame relay as well. I actualy prefer frame-relay, allows you to sell multiple services over one phy connection, allows you to swap in more vendors, etc... Other than throwaway cpe that doesnt properly support it, whats not to like in frame-relay for serial connections? frame-relay switching interface Serial5/0/0:11 no ip address encapsulation frame-relay IETF frame-relay lmi-type ansi frame-relay intf-type dce interface Serial5/0/0:11.16 point-to-point ip vrf forwarding XXX ip address 66.aa.bb.cc 255.255.255.252 no cdp enable frame-relay interface-dlci 16 end _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
