http://www.cisco.com/application/pdf/en/us/guest/products/ps7347/c1037/c dccont_0900aecd8064772c.pdf
Also have in mind that Cisco just released a new firmware for their 3750, 3560, 2970, 2960 series switches supporting LLDP and of course CDP. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Uwe Sauerland Sent: Thursday, August 09, 2007 6:05 AM To: [email protected] Subject: [c-nsp] HP/Cisco LLDP/CDP Hello, we want to provide dot1q-tunnel/l2-tunnel service based on 3560 for a customer. The customer end-devices are HP ProCurve switches. l2-tunnel on Cisco supports STP/VTP/CDP, but no LLDP (I found no other indication so far), and unfortunately the customer wants to use LLDP for his management software (I guess the ProCurve management tool). Any idea/experience in how to fulfil this requirement? Thanks! Uwe _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
