I have just enabled a second E1 for a customer. No problem there as such, just two point-to-point links with same weight routes pointing towards both links, results in a pretty equal distribution of the traffic flows on both links. Of course this also means a single flow will only have a maximum of 2mbit of bandwidth available (which in this case isn't really much of a problem - at least not yet). I could go Multilink PPP, but as the lines are supposed to be redundant, I don't want to risk the whole bundle being unusable if one of the links is dead ...
Suggestions anybody? -garry -- They who would give up an essential liberty for temporary security, neiter deserve nor receives either -- B.Franklin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
