At 08:45 PM 11-08-07 +0200, [REDACTED] wrote: Although not specific for SUP2, start here and search for "Engine 2" in the text: http://www.cisco.com/en/US/products/hw/switches/ps708/products_white_paper0900aecd802ca5d6.shtml
-Hank >Hi, > >I'm currently work for better protect our devices. > >I would like to rate-limit the traffic to MSFC and the traffic >soft-switched (including IPv6 traffic) for don't kill the route-engine. > >How i can do that on a SUP2/MSFC2 running SXF10 ? > >I know how do that on a SUP720 with Control Plane Policing but this is >not supported on SUP2/MSFC2. > >Any tips are welcome. > >Thank you > >Best Regards, > >-- >[REDACTED] > >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
