Nicolas, Take a look at: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/d os.htm
Sup2 does not have all the latest goodies, and I would recommend taking a look at Sup720... Arie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [REDACTED] Sent: Saturday, August 11, 2007 21:45 PM To: [email protected] Subject: [c-nsp] Cisco 6500 SUP2/MSFC2 protection and rate-limiting Hi, I'm currently work for better protect our devices. I would like to rate-limit the traffic to MSFC and the traffic soft-switched (including IPv6 traffic) for don't kill the route-engine. How i can do that on a SUP2/MSFC2 running SXF10 ? I know how do that on a SUP720 with Control Plane Policing but this is not supported on SUP2/MSFC2. Any tips are welcome. Thank you Best Regards, -- [REDACTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
