At 10:38 PM 8/13/2007, a. rahman isnaini r. sutan wrote: >Am I right to say that MLPPP could utilize all bundled T1/E1 100% ? >Or it might be wouldn't work normally as there some headers added on ? >And recommended is 75% for a normal load balancing. > >Any suggestion would be appreciated.
The MLPPP line protocol overhead is negligible. However, on some platforms, the CPU overhead is high. On any modern Cisco router (18xx/28xx/38xx+) or any higher end older router (3700,7200) you should be fine up to the maximum of 8xT1/E1. Try 8xT1 with a full 12Mbit/s on a 3620 or 4xT1 on a 2600 and you may run out of CPU. -Robert Tellurian Networks - Global Hosting Solutions Since 1995 http://www.tellurian.com | 888-TELLURIAN | 973-300-9211 "Well done is better than well said." - Benjamin Franklin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
