On Thu, Aug 16, 2007 at 06:14:32PM +0300, [EMAIL PROTECTED] wrote: > > I want to establish a connexion between the ?? Serial interface 1 ?? > and ?? the ethernet interface 1 ??, its must be inside the same > pool address (for e.g /30 netmask). For this, the router in the > middle must be really transparent (bridge). > > Is it possible to establish this link ? If yes, could someone > help us for the configuration ?
Search for the following commands: interface Ethernet1 bridge-group 2 ! interface Serial1 bridge-group 2 ! bridge 2 protocol ieee _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
