Justin Shore wrote: > This has been talked about before on this list but I'd like to bring it > up again for my particular situation. > > I have a pair of border routers, 1 with 2 upstream connection and the > other with a single connection. I'm pulling down full tables from each > provider and have iBGP between the border routers and the core routers. > Each border router has a static default pointed to the outgoing > interface for the local upstream connections (2 on one router and 1 on > the other). As expected the router with 2 default routes flops back and > forth between the 2 interfaces every second or two. >
If you have a full mesh and full tables from your upstreams, what do you need default routes for? I only ask because I have a similar setup and I have no need for a default route in anything that speaks BGP. ~Seth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
