Thanks for the reply. We seem to be pushing about 260M on the few we have now so just wanted to know where our limit is going to be before I replace them with GEIP+ cards. It sounds like we are at that point now.
Thanks again. Troy Beisigl -----Original Message----- From: Marcus Lasarko [mailto:[EMAIL PROTECTED] Sent: Friday, August 17, 2007 7:10 AM To: Troy Beisigl Cc: [email protected] Subject: Re: [c-nsp] GEIP speed vs. GEIP+ speed. Greetings Troy, IIRC the former GEIP is VIP2-50-based and the GEIP+ is VIP4-80-based. Having similar hardware architecture and data throughput capabilities would suggest ~ 300-400 Mbps "published", which I would interpret as 150-200 Mbps average depending upon your configuration (YMMV). I would also guesstimate throughput|capacity from a L3 switching perspective of approximately 100-120 Kpps for the GEIP. I think I read some caveats regarding memory and such, but I believe current code requirements have successfully mitigated these concerns. HTH, ~M >>> "Troy Beisigl" <[EMAIL PROTECTED]> 8/16/2007 4:04 PM >>> I know that Cisco states that the GEIP+ can do 800+Mpbs in the 7500 series but I was not able to find anything about the GEIP. Knowing the limitation of the VIP's speed, what could one expect to get out of the GEIP? Thanks. Troy _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
