If you are using to dial out then AUX, but if you want to use it as a backup for OOB then I would use the console. That will enable you to see any messages appearing during boot up.
Aaron On 8/21/07, Conaway, Aaron <[EMAIL PROTECTED]> wrote: > > Give these a shot. > > > Cable guide: > > http://www.cisco.com/warp/public/471/mod-aux-dialout.html > > > Config guide: > > http://www.cisco.com/en/US/tech/tk801/tk36/technologies_tech_note09186a0 > 08009428b.shtml > > ----- > Aaron Conaway > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Scott Granados > > Sent: Tuesday, August 21, 2007 4:00 PM > > To: [email protected] > > Subject: [c-nsp] external modem on 2610 question > > > > This is probably a basic question but Google isn't yielding > > the results I > > need. I'm trying to attach an external modem to a 2610 for > > backup purposes > > (not use a WIC). Do I simply attach to the AUX port with the > > console cable > > or do I use the console port for this. Does anyone have a > > pointer for > > documentation on using an external modem with a 2600 series router? > > > > Thanks > > Scott > > > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
