Hi List, Has anyone ever run into this same scenario where a VXR would skip booting on 12.2(31)SB6 specified on startup config and would instead boot into JK9S-M 12.4? conf-reg set at 0x2102; valid images on disk.
Hardware: 7206VXR / NPE-G1 / 1GB DRAM PA's: PA-8T-V35= PA-2FE-TX PA-A3-OC3SMI= Boot: boot system flash c7200-p-mz.122-31.SB6.bin boot system flash c7200-jk9s-mz.124-1.bin #sh bootvar BOOT variable = c7200-p-mz.122-31.SB6.bin,1;c7200-jk9s-mz.124-1.bin,1; CONFIG_FILE variable does not exist BOOTLDR variable does not exist Configuration register is 0x2102 Or, I may just be missing something here? Thanks, Roy _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
