* [EMAIL PROTECTED] (roy) [Fri 24 Aug 2007, 08:42 CEST]:
>Boot:
>boot system flash c7200-p-mz.122-31.SB6.bin
>boot system flash c7200-jk9s-mz.124-1.bin
>
>#sh bootvar
>BOOT variable = c7200-p-mz.122-31.SB6.bin,1;c7200-jk9s-mz.124-1.bin,1;
>CONFIG_FILE variable does not exist
>BOOTLDR variable does not exist
>Configuration register is 0x2102
>
>
>Or, I may just be missing something here?
Yes, you are - a `disk0:' in the filename specification. Right now it
probably just boots the first image it encounters on the flash filesystem.
-- Niels.
--
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
