Supported GE modules are GEIP and GEIP+... Maximum data throughput 350 Mbps to 400n Mbps. It can vary in some circumstanz.
Regards, Masood Ahmad Shah -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Tinka Sent: Thursday, August 09, 2007 9:22 AM To: [email protected] Subject: Re: [c-nsp] gigabit ports/modules for 7507 and 7513 routers On Wednesday 08 August 2007 06:05, Howard Leadmon wrote: > On that topic, does anyone know what type of real world throughput > one should be able to get on the onboard GE ports? I know they aren't > limited by the PCI bus, as they are built in, but can they be run full > bore, or anything close to it? On a slightly similar note, the 7201 FAQ suggests the 4th Gig-E port directly hangs off the PCI-X bus and can reach wire speed for all packet sizes... This would be interesting (if actually possible), but wonder how much of this would be affected by (or would affect) the CPU. We are planning to deploy some 7201's in the network, and would like to test this when we receive them. If anyone else has already had the pleasure, please share. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
