Not sure if this was answered already. What is the config register set to?
Can you get the output of 'show bootvar' and 'remote command switch show bootvar' Also, at what point is the [ctrl-break] not working? Does it not work as you bootup (when the rommon image banner is printed)? Or does it not work once the IOS is booted (which is controlled by the rommon variable). sukumar On Thu, 23 Aug 2007, Ruben Alvarez wrote: > All, > > I went through the procedure to upgrade the ROMMON on a SUP2 running IOS. > If I do a #show rom-monitor slot 1 sp, I see the new image is running. > Problem is [ctrl-break] doesn't work anymore to get into ROMMON. Anyone > have any information about this? > > Thanks. > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
