> Correct. BFD doesn't work in a VRF. It's annoying. BFD in a VRF works today on the GSR (12.0S) in the newer releases.
It will work in future releases on the different platforms. Regards, -- Aamer Akhter / [EMAIL PROTECTED] Ent & Commercial Systems, cisco Systems > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > [EMAIL PROTECTED] On Behalf Of Phil Mayers > Sent: Wednesday, August 29, 2007 7:37 AM > To: Gier, Menno de (Menno) > Cc: Cisco NSP > Subject: Re: [c-nsp] bfd in a VRF > > On Wed, 2007-08-29 at 10:52 +0200, Gier, Menno de (Menno) wrote: > > All, > > > > Between two routers I configured BGP for peering. Both routers are > not > > directly connected, but via a L2 switch. > > > > To make the switch-over faster I use bfd (Bidirectional Forwarding > > Detection) (The timers are set to 300msec with a retry timer of 3.) > > > > On my router I need to setup more BGP peering sessions for other > > services. To keep the sessions separate, I need to use VRFs for the > > separation for the service. > > > > When everything is converted to VRFs the bfd function is not working > > anymore. > > Correct. BFD doesn't work in a VRF. It's annoying. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
