sh ip nat translations Pro Inside global Inside local Outside local Outside global icmp 66.X.A.99:9893 10.2.0.1:9893 66.X.Y.129:9893 66.X.Y.129:9893
I know that it the router is not doing NAT correctly because even though is shows up in the tables, our core routers are seeing the 10. address and not the public address. Below is from the console of one of our core routers that router C hands off traffic to for the outside world. Sep 17 17:17:20: ICMP: dst (10.2.0.1) host unreachable sent to 66.X.Y.129 Troy Beisigl -----Original Message----- From: Vincent De Keyzer [mailto:[EMAIL PROTECTED] Sent: Monday, September 17, 2007 6:04 AM To: 'Troy Beisigl' Cc: [email protected] Subject: RE: [c-nsp] NAT question. > packets from the Ethernet of Router A do not seem to get nat'd, however to > show up in the nat translations table. What do you mean by that? Please post outputs of "sh ip nat tran" for both 192.168 and 10. What makes you think that don't "get nat'd" ? Vincent _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
