"At what point would you stop using multiple 7200s and go to a bigger box?"
We run 7200s with either 6x8 Port E1 Card or the Channelised STM1(OC3) PA -which gives 63xE1 (PA-STM-1) We run hierarchical 6-layer QoS and a G1 could happily run 2 of those (we only run one but are in a very cautious environment). So A rack with 8 7200-g1 + 2 Channelised STM1 per chassis could give you 1000 E1 without the hassle of a 10k. (Assuming of course a channelised STM1 equivalent is available to you) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Richey Sent: 20 September 2007 21:20 To: [email protected] Subject: [c-nsp] Advice on Terminating T1s I've got a 7206 with an NPE-150 with a PA-MC-T3 and a 1 Port 100Mb FE card. The most traffic I see out of this router is about 8 to 12mb during peek times. Would adding a second PA-MC-T3 to this router be too much for it? Going forward sales is adding about 15 to 20 T1s a month to the network. Any suggestions on what to start looking at? At what point would you stop using multiple 7200s and go to a bigger box? Richey _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
