Rodney Dunn wrote: > It's not in any shipping code yet. > > I happened to check it today as I'm in a Carrier Ethernet Services class. > > There is a request in to port the changes to SRA and SRB throttle. > > No clue yet where they will allow them to go yet. > > Rodney
Thanks for this Rodney. Although I really want this as described, I want this backporting to 12.2SB (or 12.2SRC depending on what happens there) and 12.0S, to be able to really rely on it, ie 7200/7301/GSR as well as 7600. Any updates on target releases for this would be greatly appreciated. Ian > On Wed, Sep 19, 2007 at 02:00:24AM +0100, David Freedman wrote: > >>Appears to now be "resolved", does anybody know what feature name this >>became, or where I can find it? >> >>I'm looking at being able to modify VLAN based EoMPLS attachment circuit >>"perceived" MTU such to be able to fool an EoMPLS pseudowire into being able >>to come up (to pass RFC4447 MTU check) when trunk (main) interface is of a >>higher MTU on the local router than on the remote. >> >>Kind Regards, >> >>David Freedman -- Ian Dickinson Senior Network Development Engineer Pipex Communications [EMAIL PROTECTED] http://www.pipex.net This e-mail is subject to: http://www.pipex.net/disclaimer.html _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
