I have come to this solution and I hope things will get smooth by using these interface mode commands....
storm-control broadcast level 30 25 storm-control broadcast level 25 15 what do you guys suggest? Regards, Masood Ahmad Shah -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Masood Ahmad Shah Sent: Tuesday, September 25, 2007 6:50 PM To: [email protected] Subject: [c-nsp] Swtich Broadcast/Multicast Switch Model: 3550 Some of the ports on the Switch is experiencing Broadcast and Multicast problems. I want to configure it so that broadcasts do not take more than 30% of the bandwidth and Multicast does not take more than 20% of the bandwidth. For broadcast traffic, the port should forward again when it falls below 25%. For Multicast traffic, the port should forward again when it falls below 15%. Please suggest recommended settings. Regards, Masood Ahmad Shah _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
