I believe you can get the "conformed" packets counter, so by getting these in periods of 5' you can create your graphs. It's like getting ifInOctets & ifOutOctets.
-- Tassos omar parihuana wrote on 26/9/2007 2:48 πμ: > Hi List, > > I configure QoS via MQC, now I need to get the utilization of each > class-map created via SNMP. Is it possible? Exactly I'd like to get the: 30 > second offered rate, in the example: 384000bps. What MIB can I use? I found > Class-based-Qos-MIB but the offered rate is not provided. My intention is > graph this value with MRTG by each class, so I can graph the class > utilization. > > Class-map: CRITICAL-DATA (match-all) > 205974 packets, 173823962 bytes > 30 second offered rate 348000 bps, drop rate 0 bps > Match: ip dscp af31 > police: > cir 2104000 bps, bc 263000 bytes > conformed 207565 packets, 175035118 bytes; actions: > transmit > exceeded 0 packets, 0 bytes; actions: > set-dscp-transmit af32 > conformed 384000 bps, exceed 0 bps > Thanks for your help.. > > Rgds. > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
