The class based MIB is complex but can be walked and deciphered manually but it takes a while and you've got to be pretty comfortable with MIBs.
Once you have the relevant OID and index you could create a dedicated MRTG config. Which would be valid until the next reboot or policy change. (Can be mitigated to an extent with the equiv command to ifindex persist). To be honest its probably quicker to get Cacti up and running and use the Cacti script - which allows point and click selection of the policy to monitor than it is to do it manually for MRTG. Install Cacti asap - you wont regret it. Dean -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of omar parihuana Sent: 26 September 2007 17:22 To: Ed Ravin Cc: [email protected] Subject: Re: [c-nsp] MIB Class-based-QoS Thanks for your response.. Unfortunately, I'm using MRTG, we're going to migrate to Cacti, but meanwhile, I don't know if someone knows about addons/plugin/tool/anything for MRTG. Thanks again Rgds. On 9/26/07, Ed Ravin <[EMAIL PROTECTED]> wrote: > > On Wed, Sep 26, 2007 at 09:39:38AM +0200, Daniel Suchy wrote: > > There's addon for Cacti doing this. > > See http://forums.cacti.net/about12485.html > > Also for Cricket (genDevConfig and its predecessor genRtrConfig): > > http://acktomic.com/?p=4 > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- Omar E.P.T ----------------- Certified Networking Professionals make better Connections! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
