Anybody here ever terminated ADSL from an Adtran TA3000 using an SM2 blade on a Cisco 7206 and used DHCP? I can get DHCP to work using pass through, but then I get no circuit id information as far as what port the customer is on, etc. If I enable DCHP authentication on the SM2, I get nothing. Adtran insists it should "just work" and points the finger at the Cisco, but doesn't have any ideas as to why it would be blocked. I'm messing around with ip dhcp relay options but nothing so far has been successful.
Thanks, Denny Reiter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
