During a recent upgrade from the ZU2 code to SXH on one of our 6524s I ran into BFD trouble. In ZU2 we had BFD configured on a pair of SVIs and it worked great. Apparently in SXH BFD is only supported on physical interfaces.
TAC told me some time back that ZU2 was a special SX release to support the ME6524s. Does anyone know why the feature regression occured or even better if this will be fixed in a later release? L3 interfaces aren't possible in our setup without some serious reworking. Thanks Justin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
