This particular verbiage refers only to the 6, 9, & 13 slot systems. Tim
At 10:14 PM 10/23/2007 -0500, mack observed: >I have seen several compatibility notes that state that the Sup720 >requires a 2500W PS. >However, It is also listed as compatible with the 6503-E. >Can the Sup720-3BXL be used in a 6503-E with the 1400W PS? >Or does it require combined mode 1400W PSes? >Or does this limitation only apply to 6,9 and 13 slot chassis. > >Obviously the power draw can be handled by the 1400W PS. >The real question is does IOS limit this particular combination? > >LR Mack McBride >Network Administrator >Alpha Red, Inc. >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ Tim Stevenson, [EMAIL PROTECTED] Routing & Switching CCIE #5561 Technical Marketing Engineer, Data Center BU Cisco Systems, http://www.cisco.com IP Phone: 408-526-6759 ******************************************************** The contents of this message may be *Cisco Confidential* and are intended for the specified recipients only. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
