Ahh... now this raises the question. Has anyone actually fired up a 720 in a larger chassis (say a 9-slot) without any cards and seen what kind of power availability it reports? Or if it even fires up?
Deepak Tim Stevenson wrote: > This particular verbiage refers only to the 6, 9, & 13 slot systems. > > Tim > > At 10:14 PM 10/23/2007 -0500, mack observed: >> I have seen several compatibility notes that state that the Sup720 >> requires a 2500W PS. >> However, It is also listed as compatible with the 6503-E. >> Can the Sup720-3BXL be used in a 6503-E with the 1400W PS? >> Or does it require combined mode 1400W PSes? >> Or does this limitation only apply to 6,9 and 13 slot chassis. >> >> Obviously the power draw can be handled by the 1400W PS. >> The real question is does IOS limit this particular combination? >> >> LR Mack McBride >> Network Administrator >> Alpha Red, Inc. >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > Tim Stevenson, [EMAIL PROTECTED] > Routing & Switching CCIE #5561 > Technical Marketing Engineer, Data Center BU > Cisco Systems, http://www.cisco.com > IP Phone: 408-526-6759 > ******************************************************** > The contents of this message may be *Cisco Confidential* > and are intended for the specified recipients only. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
