Hello Paul:
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:cisco-nsp-
> [EMAIL PROTECTED] On Behalf Of Paul Stewart
> Sent: Tuesday, October 23, 2007 6:49 PM
> To: [email protected]
> Subject: [c-nsp] Ethernet Question - Problem with link
>
> Hi folks...
>
> Just looking for a thought - ethernet cable from switch to switch.
One
> side
> is up/up but other side is up/down....
>
> Both sides configured properly (access port, no trunking). 6500 on
one
> side
> and 3560 on the other....
>
> Cabling problem? It's a new connection...
>
> Thanks,
>
> Paul
I would:
1) Swap crossover cables (just to be sure)
2) Set both ports to default
- default interface x/x
3) Reconfigure the access portion and any other settings
Regards,
Mike
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
