I use show cdp neighbors we i can and drawout the design in a very detailed visio (34x44 ANSI) or larger works for most of my discoveries. Takes a while but its worth it in the end.
________________________________________ From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of Sami Joseph [EMAIL PROTECTED] Sent: Sunday, October 28, 2007 3:30 AM To: [email protected] Subject: [c-nsp] Network Topology Mapping Hello, I have a corporate network with 6500s as core and 3560s as access, IP phones and a lot of other routers and PIXs. I need to have a full detailed network documentation and mapping of topology because we have such a big network a no documentation which always slows our troubleshooting. I am looking for guidance from you guys on what is the best way/tool/process to do it from your experience? any templates for the documentation? Thanks, Sam _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
