On Mon, 2007-10-29 at 12:21 +0000, [EMAIL PROTECTED] wrote: > All. >
It's considered polite to start a new thread rather than hijack existing ones, just FYI > I have a 3750 which is giving me a strange error . When i try to apply an > input service-policy map on one of it is routed interface. > > > > policy-map gbb_marking > class RealTime > set dscp af31 > class Voice > set dscp ef > class Network > set dscp cs6 > class Internet > set dscp af21 > class Batch > set dscp af11 > class Interactive > set dscp default > class Video-conf > set dscp af41 > class Media-Control > set dscp cs3 > ! You don't show the class maps or ACLs here, but from what comes next I assume they're pretty extensive... > RABRSVH001(config)#interface GigabitEthernet1/0/8 > RABRSVH001(config-if)# service-policy input gbb_marking > Add Policy failed for interface GigabitEthernet1/0/8 > > Service Policy attachment failed > > > > Error Message : QOSMGR-4-HARDWARE_NOT_SUPPORTED: Hardware limitation has > reached for policymap [bla]. > > > > > The policy-map configuration has exceeded the limitation of the hardware. > You configured more QoS ACL entries than the number specified in the > Switch Database Management (SDM) template. [chars] is the policy-map name. > > Recommended Action : Reconfigure the class map or the policy map, and > reduce the number of QoS ACLs. That seems pretty unambiguous to me. I'd hardly call it strange. Have you done what it suggests? > > interface GigabitEthernet1/0/8 > no switchport > bandwidth 10000 > ip address 190.10.2.7 255.255.255.0 ! Routed port > no ip proxy-arp > ip pim query-interval 10 > ip pim sparse-mode > ip igmp query-interval 20 > ip ospf message-digest-key 1 md5 7 046F02122020470F > ip ospf hello-interval 3 > ip ospf dead-interval 10 > speed 100 > duplex full > srr-queue bandwidth share 10 10 60 20 > srr-queue bandwidth shape 10 0 0 0 > end > > > > RABRSVH001#sh ver | i System > Copyright (c) 1986-2007 by Cisco Systems, Inc. > System returned to ROM by power-on > System restarted at 15:54:23 UTC Sun Jun 24 2007 > System image file is "flash:c3750-ipservicesk9-mz.122-25.SEE3.bin" > System serial number : FOC1008Y2VZ > > I have tried to remove the layer 2 Cos configuration on the port and > re-apply but no luck ...... > Funny thing is when i try to apply the same service policy to a "free > configuration" port it works ! As this is in production i can't really I don't understand that. What is a "free configuration" port? > "play" with it during the day . > Does this error message means "3750s" are lousy when it comes to Qos ? It's a hardware platform. Hardware platforms have limited resources; in this case, the QoS rules have to fit into TCAM. You've either used a huge ACL or set of medium-sized ACLs, such that the QoS rules can't fit into the TCAM for this port. You need to simplify your ruleset. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
