John van Oppen wrote: > Engine0 linecards are not TCAM limited as they run in software, so when > the card runs out of ram, that is the limit of its TCAM. We have 256 > MB of ram on all our engine0 cards, they run with about 100 MB of free > ram as of today. > > Engine2 cards (three port gigE) for example have already run out of TCAM > if they are running ACLs or MPLS. With a straight IPv4 table and no > ACLs ours seem to run right at 30% utilization (show ip cef resource). > The newer cards have larger TCAMs.
Very helpful information...what commands should I be using to assess where I'm at regarding Eng2 TCAM size? Thanks, Pete _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
