This is the easiest way since it shows percentage for engine2 cards. router>show ip cef res Hardware resource allocation status summary Green (Normal), Yellow (Caution) Red (Alarm) Slot HW Resource Name Util Alert 2 E2_Rx_PLU 30 G 2 E2_Rx_TLU 24 G 3 E2_Rx_PLU 30 G 3 E2_Rx_TLU 24 G
John van Oppen Spectrum Networks LLC 206.973.8302 (Direct) 206.973.8300 (main office) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Drew Weaver Sent: Tuesday, October 30, 2007 8:14 AM To: 'Mikael Abrahamsson'; [email protected] Subject: Re: [c-nsp] Understanding TCAM/route limitations in the GSR.. And which of the metrics below is the 'key'? Free Memory (Free Memory excluding chunks) ----------- PLU SDRAM: 50927616 bytes (50575360 bytes) TLU SDRAM: 32861600 bytes (31612160 bytes) PSA SSRAM: 809728 bytes ( 795776 bytes) ? Thanks Mikael the GSR is a total mystery in some ways. -Drew -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mikael Abrahamsson Sent: Tuesday, October 30, 2007 10:52 AM To: [email protected] Subject: Re: [c-nsp] Understanding TCAM/route limitations in the GSR.. On Tue, 30 Oct 2007, Pete Templin wrote: > Very helpful information...what commands should I be using to assess > where I'm at regarding Eng2 TCAM size? "show controllers psa mem" on the LC in question is a good starting point. -- Mikael Abrahamsson email: [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
