Cisco has OER feature on some routers, but that wouldn't fulfill the requirements on this scenario. Radware LinkProof is a good but expensive solution, so you might consider making your own Linux box that can be customized to work in a similar fashion.
If Vyatta folks are reading this list, that would be a killer feature that could make a Vyatta box leapfrog Cisco ISR. Rubens On 11/1/07, The Father <[EMAIL PROTECTED]> wrote: > One of our customers is looking to us to provide a failover method for > their two internet access links. Normally this wouldn't be a problem > but the customer has public IPs that were assigned to them from ISP-A > (we're ISP-B) and they use them for servers behind ISP-B's connection. > They would like it so that when ISP-A goes down, the link that we > provide becomes primary and inbound and outbound traffic. Does anyone > know of a Cisco (or other vendor) solution that could take care of > this? I've tried explaining that for customers in these situations, BGP > and public ASN/CIDR blocks are what's normally required for this to work. > > Thanks. > > Jose > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
