I can't say that we've been disappointed at all with our FCP. We've been using an FCP for several years now and we've only had one hardware failure with it, shortly after purchase, which was promptly replaced by Internap. It makes several hundred to a couple thousand route changes per day. It's seriously reduced not only our costs for transit, but also routing issue/latency complaints. There used to be times where we would have to manually de-pref a prefix through one provider because of some reachability issue, but I've not had to do that in years.
I'm a little disappointed in their software release schedule, as updates don't come too often, but less updates means less buggy software, right? Right? ;-) -evt > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of neal rauhauser > Sent: Friday, November 02, 2007 12:34 PM > To: [email protected] > Subject: [c-nsp] Internap Flow Control Platform? > > I imagine some of you are using the Internap FCP product. > How do you find > it? I've just spoken with their sales and technical staff - > got a customer > evaluating it - I wanted to hear real world stories. My guys > have a couple > of routers, a couple of upstreams, and they're about to add a > couple of > peers ... not a very big network ... but we have one upstream > that is very > naughty, so if this stuff works it would be a huge relief. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
