We'd never do that scenario so that's possibly one reason we've never gotten bit. One master across our network is all we have and all we want ;) Everything else is a client....
Paul -----Original Message----- From: Gert Doering [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 06, 2007 7:18 AM To: Paul Stewart Cc: 'Raja Subramanian'; [email protected] Subject: Re: [c-nsp] Removing VTP Server switch Hi, On Tue, Nov 06, 2007 at 06:39:45AM -0500, Paul Stewart wrote: > I was kind of wondering the same thing... a couple hundred VLAN's spread > across several 6500's and never had an issue in 7 years.... :) If you want fun, try this: - connect another switch, have it learn the VTP database, make it a VTP master (VTP can have multiple masters) - disconnect it, to use it in a lab setup, or so - for the LAB setup, decide "oh, I don't need all those VLANs that are there from the original setup" - some time later, connect it back to the "real" setup, and watch all VLANs on *all* switches go... gert -- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany [EMAIL PROTECTED] fax: +49-89-35655025 [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
