On (2007-11-09 13:44 +0100), Daniel Dib wrote: > I don't know your topology but I'm not sure why you would want to > connect customers directly to a 7600? Why not put a router or l3-device > in between, then broadcasts will be filtered anyway.
Luckily I don't do almost at all L2 in 7600's, but lot of people can't live with that kind of topology. Also even if you have L3 port, your control-plane will go down on STP flood received on the L3 port (tested) not sure about unknown unicast on L3, prolly not relevant. -- ++ytti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
