Hi I am trying to turn on control-plane policing on a 7500 with RSP4 and
VIP2/50's running 12.2(25)S12, and I have/get this:
ip cef distributed
!
class-map match-all TrustedControlAddresses
match access-group 153
!
policy-map AllowTrustedControlAddresses
class TrustedControlAddresses
police cir 32000 bc 1500 be 1500
conform-action drop
exceed-action drop
router(config)#control-plane
router(config-cp)#service input AllowTrustedControlAddresses
service-policy is supported only on VIP interfaces with DCEF enabled
error: failed to install policy map AllowTrustedControlAddresses
I already have ip cef distributed in the config, and I did an ip route-cache
dist under the fast ethernet, ATM and DS3 interfaces installed in the
router. What am I missing?
Thanks,
Chris
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
