Thanks.. When I "spot check" a bunch of other 7206's we never ever see "Unknown Protocol" errors.... I guess because we've never seen them before had me wondering what's going on...;)
-----Original Message----- From: Holtz,Robert [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 14, 2007 12:40 PM To: Paul Stewart; [email protected] Subject: RE: [c-nsp] Protocol Errors This isn't really that large a number when you look at the total number of packets compared to the number of drops. You're only dropping 0.000043% of the traffic. If you are not the intended recipient of this message (including attachments), or if you have received this message in error, immediately notify us and delete it and any attachments. If you no longer wish to receive e-mail from Edward Jones, please send this request to [EMAIL PROTECTED] You must include the e-mail address that you wish not to receive e-mail communications. For important additional information related to this e-mail, visit www.edwardjones.com/US_email_disclosure -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Stewart Sent: Wednesday, November 14, 2007 11:29 AM To: [email protected] Subject: [c-nsp] Protocol Errors Anyone clue me in as to why we would be getting so many drops, especially "unknown protocol"? dis1-rtr-pt#sh interfaces GigabitEthernet 0/3 GigabitEthernet0/3 is up, line protocol is up Hardware is BCM1250 Internal MAC, address is 0018.1864.9b19 (bia 0018.1864.9b19) MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 2/255, rxload 1/255 Encapsulation 802.1Q Virtual LAN, Vlan ID 1., loopback not set Keepalive set (10 sec) Full-duplex, 1000Mb/s, link type is force-up, media type is SX output flow-control is unsupported, input flow-control is XON ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 632540 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 4177000 bits/sec, 1901 packets/sec 5 minute output rate 9342000 bits/sec, 2144 packets/sec 1373004007 packets input, 508264658119 bytes, 0 no buffer Received 4501821 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 8561621 multicast, 0 pause input 0 input packets with dribble condition detected 1529166382 packets output, 946856618633 bytes, 0 underruns 3 output errors, 0 collisions, 5 interface resets 408856 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 3 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out This is on a 7206VXR router - the 0/3 interface has several subinterfaces including a PPPOE interface as well..... Thanks, Paul _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
