I guess the only way to tell is to get a sniffer inline somewhere and see what's on the wire..... thanks ....
-----Original Message----- From: Church, Charles [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 14, 2007 1:02 PM To: Paul Stewart; [email protected] Subject: RE: [c-nsp] Protocol Errors It's hard to tell if that an input or an output error. If it's input, is it possible you're receiving protocols you don't have configured - IPX, Appletalk, IPv6, some other ethercode? Something to do with the PPPOE maybe? Chuck -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Stewart Sent: Wednesday, November 14, 2007 12:45 PM To: 'Holtz,Robert'; [email protected] Subject: Re: [c-nsp] Protocol Errors Thanks.. When I "spot check" a bunch of other 7206's we never ever see "Unknown Protocol" errors.... I guess because we've never seen them before had me wondering what's going on...;) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
