This should also work. Its supported on the 2950 for sure. Not sure about the older 2924. This is a function of DTP running on the port.
switchport nonegotiate -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Pierre Lamy Sent: Friday, November 30, 2007 2:56 PM To: [email protected] Subject: [c-nsp] Native VLAN mismatches between 2924/2950 I'm getting a lot of Native VLAN mismatches between my 2950 and 2924s. This is due to the case difference on the 2 platforms, between VLAN1 and Vlan1. Is there any way to (1) fix the error or (2) suppress the CDP error messages Nov 30 14:54:27 192.168.0.113 26469: %CDP-4-NATIVE_VLAN_MISMATCH: Native VLAN mismatch discovered on FastEthernet0/15 (0), with SW1 FastEthernet0/18 (1). The documentation and a google search indicate that simply changing the name doesn't work; changing the conf file, uploading via tftp didn't work either. And you can't simply delete/recreate the Vlan1. Regards, Pierre Lamy _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ Note: This message and any attachments is intended solely for the use of the individual or entity to which it is addressed and may contain information that is non-public, proprietary, legally privileged, confidential, and/or exempt from disclosure. If you are not the intended recipient, you are hereby notified that any use, dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the original sender immediately by telephone or return email and destroy or delete this message along with any attachments immediately. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
