Turns out was because (as far as I can tell) the 2950 only supports dot1q and the 2924XL only supports ISL. Go figure
Pierre Pierre Lamy wrote: > I'm getting a lot of Native VLAN mismatches between my 2950 and 2924s. > This is due to the case difference on the 2 platforms, between VLAN1 and > Vlan1. > > Is there any way to (1) fix the error or (2) suppress the CDP error messages > > Nov 30 14:54:27 192.168.0.113 26469: %CDP-4-NATIVE_VLAN_MISMATCH: Native > VLAN mismatch discovered on FastEthernet0/15 (0), with SW1 > FastEthernet0/18 (1). > > The documentation and a google search indicate that simply changing the > name doesn't work; changing the conf file, uploading via tftp didn't > work either. And you can't simply delete/recreate the Vlan1. > > Regards, > > Pierre Lamy > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
